If you already have the DiSco oscilloscope and would like to install the latest software please download and install the Upgrade Tool first.
It will detect the version of the device's firmware and upgrade it if necessary. Follow the link for the instructions: DiSco Upgrade Tool

If you are a new customer or already run the Upgrade Tool please read the following:

This version of the application supports Windows 2000/XP/2003/Vista and Windows 7 32- and 64-bit versions.
Please do the following steps to install the USB Oscilloscope DiSco software:

• Download and install DiSco Application
• Follow the Device Driver Installation Wizard instructions, finish the installation
• Connect the device to the USB port and follow the Found New Hardware Wizard instructions
• Chose "No, not this time" at the first screen, and "Install the software automatically" at the second, complete the installation
• Open DiSco Oscilloscope application

The software is installed and the device is ready to use.

Note:

• If an error message comes up, close the application and run the file:
  C:\Program Files\DiSco\Application\Driver\DPInst.exe
• If you are using Vista 64-bit you may get the error message:
  "You have to run the 64-bit version of DPInst.exe on this machine.
  Contact the vendor that provided you this package."
Simply ignore it. The setup will pick up right version of the driver.